. .
.
Flow through porous media - II
.
.

PROCEDURE

 

The steps performed during the experiment are as follows :

1. The setup constitutes a teflon tubular cell with a flat circular teflon base plate that houses the ceramic membrane.

2. The membrane was kept in the teflon casing and sealed with epoxy resin.

3. The outlet of the setup was connected to a gas flow meter using a silicon tube for measuring the gas flow rate at various trans - membrane pressure differentials.

 

EXPERIMENTAL SETUP :

Permeation Cell 

 

 

 

 

Membrane holder

 

 

Compressor

 The animation below describes the process :

 

 

 

The snapshots below describes the procedure in steps :


Cite this Simulator:

.....
..... .....
Copyright @ 2017 Under the NME ICT initiative of MHRD (Licensing Terms)
 Powered by AmritaVirtual Lab Collaborative Platform [ Ver 00.12. ]